如何在CentOS7下安装redis3.0.6并配置集群
安装依赖
[root@centos7-1 ~]# yum -y install gcc openssl-devel libyaml-devel libffi-devel readline-devel zlib-devel gdbm-devel ncurses-devel gcc-c++ automake autoconf
安装 redis
[root@centos7-1 ~]# wget http://download.redis.io/releases/redis-3.0.6.tar.gz
[root@centos7-1 ~]# tar xvf redis-3.0.6.tar.gz
[root@centos7-1 ~]# cd redis-3.0.6/
[root@centos7-1 redis-3.0.6]# make MALLOC=libc
[root@centos7-1 redis-3.0.6]# make install
启动 server
通过命令 redis-server 来启动 redis server。通过下面的输出信息可以看出这次启动并没有指定配置文件，可以使用命令 redis-server /path/to/redis.conf 来指定具体的配置文件启动。
[root@centos7-1 redis-3.0.6]# redis-server
4435:C 25 Jan 11:40:48.816 # Warning: no config file specified, using the default config. In order to specify a config file use redis-server /path/to/redis.conf
4435:M 25 Jan 11:40:48.817 * Increased maximum number of open files to 10032 (it was originally set to 1024).
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 3.0.6 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 4435
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
4435:M 25 Jan 11:40:48.817 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
4435:M 25 Jan 11:40:48.817 # Server started, Redis version 3.0.6
4435:M 25 Jan 11:40:48.817 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
4435:M 25 Jan 11:40:48.817 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
4435:M 25 Jan 11:40:48.817 * DB loaded from disk: 0.000 seconds
4435:M 25 Jan 11:40:48.817 * The server is now ready to accept connections on port 6379
到此，单节点的 Redis server 已经安装完毕，以下进入配置和安装集群的过程。
创建集群中的6个节点
集群配置文件
集群相关的配置文件主要修改 redis.conf 中的一下几个地方，因为都部署在一个服务器上，每个节点的端口不同。
[root@centos7-1 redis-3.0.6]$ vi redis.conf
#修改以下地方
port 7000
cluster-enabled yes
cluster-config-file nodes-7000.conf
cluster-node-timeout 5000
appendonly yes
每个节点的配置文件
创建6个文件夹，分别表示一个 redis 节点，文件夹使用 redis 节点的端口号命名，文件里存放每个节点的配置文件。
[root@centos7-1 redis-3.0.6]# mkdir /usr/local/redis-cluster
[root@centos7-1 redis-3.0.6]# cd /usr/local/redis-cluster
[root@centos7-1 redis-cluster]# mkdir 7000 7001 7002 7003 7004 7005
拷贝 redis.conf 拷贝到6个文件夹中
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7000
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7001
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7002
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7003
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7004
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7005
并修改每个配置中的内容为各自节点的端口，注意 port 和 cluster-config-file 的值必须唯一。
分别启动每个节点
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7000/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7001/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7002/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7003/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7004/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7005/redis.conf
启动完成后查看进程
[root@centos7-1 ~]# ps -ef | grep redis
root 4704 2177 0 12:12 pts/0 00:00:07 redis-server *:7000 [cluster]
安装依赖
[root@centos7-1 ~]# yum -y install gcc openssl-devel libyaml-devel libffi-devel readline-devel zlib-devel gdbm-devel ncurses-devel gcc-c++ automake autoconf
安装 redis
[root@centos7-1 ~]# wget http://download.redis.io/releases/redis-3.0.6.tar.gz
[root@centos7-1 ~]# tar xvf redis-3.0.6.tar.gz
[root@centos7-1 ~]# cd redis-3.0.6/
[root@centos7-1 redis-3.0.6]# make MALLOC=libc
[root@centos7-1 redis-3.0.6]# make install
启动 server
通过命令 redis-server 来启动 redis server。通过下面的输出信息可以看出这次启动并没有指定配置文件，可以使用命令 redis-server /path/to/redis.conf 来指定具体的配置文件启动。
[root@centos7-1 redis-3.0.6]# redis-server
4435:C 25 Jan 11:40:48.816 # Warning: no config file specified, using the default config. In order to specify a config file use redis-server /path/to/redis.conf
4435:M 25 Jan 11:40:48.817 * Increased maximum number of open files to 10032 (it was originally set to 1024). copyright 无奈人生
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 3.0.6 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 4435
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
4435:M 25 Jan 11:40:48.817 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
4435:M 25 Jan 11:40:48.817 # Server started, Redis version 3.0.6
4435:M 25 Jan 11:40:48.817 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
4435:M 25 Jan 11:40:48.817 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
4435:M 25 Jan 11:40:48.817 * DB loaded from disk: 0.000 seconds
4435:M 25 Jan 11:40:48.817 * The server is now ready to accept connections on port 6379
到此，单节点的 Redis server 已经安装完毕，以下进入配置和安装集群的过程。
创建集群中的6个节点
copyright 无奈人生
集群配置文件
集群相关的配置文件主要修改 redis.conf 中的一下几个地方，因为都部署在一个服务器上，每个节点的端口不同。
[root@centos7-1 redis-3.0.6]$ vi redis.conf
#修改以下地方
port 7000
cluster-enabled yes
cluster-config-file nodes-7000.conf
cluster-node-timeout 5000
appendonly yes
每个节点的配置文件
创建6个文件夹，分别表示一个 redis 节点，文件夹使用 redis 节点的端口号命名，文件里存放每个节点的配置文件。
[root@centos7-1 redis-3.0.6]# mkdir /usr/local/redis-cluster
[root@centos7-1 redis-3.0.6]# cd /usr/local/redis-cluster
[root@centos7-1 redis-cluster]# mkdir 7000 7001 7002 7003 7004 7005
拷贝 redis.conf 拷贝到6个文件夹中
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7000
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7001
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7002
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7003
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7004 无奈人生安全网
[root@centos7-1 redis-cluster]# cp ~/redis-3.0.6/redis.conf 7005
并修改每个配置中的内容为各自节点的端口，注意 port 和 cluster-config-file 的值必须唯一。
分别启动每个节点
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7000/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7001/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7002/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7003/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7004/redis.conf
[root@centos7-1 ~]# redis-server /usr/local/redis-cluster/7005/redis.conf
启动完成后查看进程
[root@centos7-1 ~]# ps -ef | grep redis
root 4704 2177 0 12:12 pts/0 00:00:07 redis-server *:7000 [cluster]
内容来自无奈安全网